prikaz prve stranice dokumenta AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE
Access restricted to students and staff of home institution
undergraduate thesis
AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE
2022. urn:nbn:hr:228:333193
Bakotin, Antonio
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Cite this document

Bakotin, A. (2022). AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:333193

Bakotin, Antonio. "AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE." Undergraduate thesis, University of Split, 2022. https://urn.nsk.hr/urn:nbn:hr:228:333193

Bakotin, Antonio. "AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE." Undergraduate thesis, University of Split, 2022. https://urn.nsk.hr/urn:nbn:hr:228:333193

Bakotin, A. (2022). 'AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE', Undergraduate thesis, University of Split, accessed 04 January 2025, https://urn.nsk.hr/urn:nbn:hr:228:333193

Bakotin A. AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE [Undergraduate thesis]. Split: University of Split; 2022 [cited 2025 January 04] Available at: https://urn.nsk.hr/urn:nbn:hr:228:333193

A. Bakotin, "AUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE", Undergraduate thesis, University of Split, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:228:333193

Please login to the repository to save this object to your list.
Metadata
TitleAUTOMATIZACIJA UREĐAJA ZA SAVIJANJE ŽICE
Title (english)AUTOMATION OF WIRE BENDING DEVICES
AuthorAntonio Bakotin
MentorIvan Vrljičak (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberIgor Gabrić (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2022-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj završni rad obuhvaća izradu uređaja za savijanje žica manjih promjera te njegovu automatizaciju. Početak izrade rada kreće sa definiranjem liste zahtijeva koja zadaje sve kriterije koji ovaj uređaj mora ispuniti. Nakon čega se kreće sa izradom 3D modela u Inventoru s kojim se prikazuju sve glavne komponente i funkcije uređaja za savijanje. Kako bi uređaj obavljao funkcije bez ljudskog prisustva potrebno je automatizirati sustav, u ovom radu je za korišten je program LOGO!Soft Comfort. U ovomu radu predstavljene su dvije varijante automatizacije od kojih je jedna korištenjem releja za upravljanje motora, a druga korištenjem pokretača (drivera) koračnog motora. Ove dvije varijante traže dvije različite izvedbe programa za automatizaciju uređaja, a cilj samog rada je prikazati prednosti i mane korištenja pokretača koračnog motora u odnosu na korištenje releja.
Abstract (english)
This final paper covers the creation of a device for bending wires of smaller diameters and its own automation. Setting up the construction of the device starts with defining a list of requirements that sets the criteria this device must meet. After meeting the criteria we may begin with the creation of the 3D models in Inventor which show all the main components and the working principle of the bending device. In order to arrange the functions performed without human presence, it is necessary to automate the system, the LOGO!Soft Comfort program was used automating the system in this project. In this paper, two variants of automation are presented, one of which uses relays in order to control the motors, while the other uses stepper motor drivers. These two variants require two different versions of the program for automation of the device and the main goal of the paper is to show the advantages of using stepper motor drivers in comparison to the usage of relays.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:333193
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-26 11:23:46