prikaz prve stranice dokumenta PRORAČUN OJAČANOG OKVIRNOG NOSAČA
Access restricted to students and staff of home institution
undergraduate thesis
PRORAČUN OJAČANOG OKVIRNOG NOSAČA
2020. urn:nbn:hr:228:284119
Mijanić, Ivan
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Cite this document

Mijanić, I. (2020). PRORAČUN OJAČANOG OKVIRNOG NOSAČA (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:284119

Mijanić, Ivan. "PRORAČUN OJAČANOG OKVIRNOG NOSAČA." Undergraduate thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:284119

Mijanić, Ivan. "PRORAČUN OJAČANOG OKVIRNOG NOSAČA." Undergraduate thesis, University of Split, 2020. https://urn.nsk.hr/urn:nbn:hr:228:284119

Mijanić, I. (2020). 'PRORAČUN OJAČANOG OKVIRNOG NOSAČA', Undergraduate thesis, University of Split, accessed 17 April 2024, https://urn.nsk.hr/urn:nbn:hr:228:284119

Mijanić I. PRORAČUN OJAČANOG OKVIRNOG NOSAČA [Undergraduate thesis]. Split: University of Split; 2020 [cited 2024 April 17] Available at: https://urn.nsk.hr/urn:nbn:hr:228:284119

I. Mijanić, "PRORAČUN OJAČANOG OKVIRNOG NOSAČA", Undergraduate thesis, University of Split, Split, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:228:284119

Please login to the repository to save this object to your list.
Metadata
TitlePRORAČUN OJAČANOG OKVIRNOG NOSAČA
Title (english)CALCULATION OF PORTAL FRAME REINFORCED WITH TRUSSES
AuthorIvan Mijanić
MentorAdo Matoković (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2020-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je izvršen proračun okvirnog nosača ojačanog štapovima. U uvodnom dijelu rada ukratko je opisan okvirni i rešetkasti nosač. Nakon izvršenog proračuna okvirnog nosača s i bez ojačanja, dobivene su sile u ojačanju, prikazani su dijagrami unutarnjih sile i izvršeno je dimenzioniranje okvirnog nosača. Poslije čega su štapovima odabrani odgovarajući profili koji zadovoljavaju uvjet nosivosti. U završnom dijelu rada svi rezultati su analizirani u programu 2D Frame Analysis, dimenzioniran je proizvoljni čvor te je izvršena usporedba dobivenih rezultata.
Abstract (english)
This work paper shows calculation of portal frame reinforced with trusses. The introduction section describes the portal frame and lattice girder. After the calculation of the portal frame with and without reinforcement carried out, the forces in reinforcement were obtained, diagrams of internal forces are shown and dimensioning of the portal frame was performed. After that, the rods were selected with adequate profiles that meet the bearing capacity condition. In the last part of the work paper all results were analyzed in the 2D Frame Analysis program, an arbitrary selected node is dimensioned and the obtained results were compared.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:284119
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-12-01 10:54:54