prikaz prve stranice dokumenta SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA
Access restricted to students and staff of home institution
graduate thesis
SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA
2024. urn:nbn:hr:228:697473
Bosnić, Stipe
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Cite this document

Bosnić, S. (2024). SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA (Graduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:697473

Bosnić, Stipe. "SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA." Graduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:697473

Bosnić, Stipe. "SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA." Graduate thesis, University of Split, 2024. https://urn.nsk.hr/urn:nbn:hr:228:697473

Bosnić, S. (2024). 'SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA', Graduate thesis, University of Split, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:228:697473

Bosnić S. SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA [Graduate thesis]. Split: University of Split; 2024 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:228:697473

S. Bosnić, "SAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA", Graduate thesis, University of Split, Split, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:228:697473

Please login to the repository to save this object to your list.
Metadata
TitleSAVIJANJE I UVIJANJE TANKOSTJENOG ŠTAPA OTVORENOG POPREČNOG PRESJEKA
Title (english)BENDING AND TORSION OF A THIN-WALLED BEAM WITH AN OPEN CROSS-SECTION
AuthorStipe Bosnić
MentorAdo Matoković (mentor)
Committee memberBoris Mikulić (član povjerenstva)
Committee memberVladimir Vetma (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2024-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu opisan je pojam tankostjenog štapa, te su raspisane diferencijalne jednadžbe uvijanja konzolnog nosača i jednadžbe naprezanja. Izvršen je proračun naprezanja i kuta uvijanja za tri odabrane varijante poprečnog presjeka. Pomoću programa Microsoft Excel izraĎena je tablica za računanje naprezanja za odabrane vrste poprečnog presjeka uz mogućnost promjene početnih dimenzija i materijala. Ostatak varijanti koje nisu u potpunosti proračunate u radu su prikazane tablično pomoću programa Microsoft Excel, te su dane u prilogu dokumenta. Izvršena je usporedba dobivenih rezultata za različite poprečne presjeka i duljine štapa.
Abstract (english)
n this paper, the concept of a thin-walled beam is described, and the differential equations for the torsion of a cantilever beam and stress equations are given. A calculation of the stress and angle of twist for three types of cross-sectional variants is performed. Using Microsoft Excel, a table was created for calculating stress for the selected types of cross-sections, with the option to change the initial dimensions and material. The remaining variants that were not fully calculated in the paper are presented in tabular form using Microsoft Excel and are included in the appendix of the document. A comparison of the obtained results for different cross-sections and beam lengths is also conducted.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:697473
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2024-11-15 11:07:23