prikaz prve stranice dokumenta MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE
Access restricted to students and staff of home institution
undergraduate thesis
MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE
2022. urn:nbn:hr:228:705102
Medić, Luka
University of Split
University Department of Professional Studies
Department of Mechanical Engineering

Cite this document

Medić, L. (2022). MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE (Undergraduate thesis). Split: University of Split. Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:705102

Medić, Luka. "MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE." Undergraduate thesis, University of Split, 2022. https://urn.nsk.hr/urn:nbn:hr:228:705102

Medić, Luka. "MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE." Undergraduate thesis, University of Split, 2022. https://urn.nsk.hr/urn:nbn:hr:228:705102

Medić, L. (2022). 'MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE', Undergraduate thesis, University of Split, accessed 28 February 2025, https://urn.nsk.hr/urn:nbn:hr:228:705102

Medić L. MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE [Undergraduate thesis]. Split: University of Split; 2022 [cited 2025 February 28] Available at: https://urn.nsk.hr/urn:nbn:hr:228:705102

L. Medić, "MJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE", Undergraduate thesis, University of Split, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:228:705102

Please login to the repository to save this object to your list.
Metadata
TitleMJERENJE GEOMETRIJSKIH TOLERANCIJA NA PRIMJERU OSOVINE
Title (english)MEASUREMENT OF GEOMETRIC TOLERANCES ON THE EXAMPLE OF A SHAFT
AuthorLuka Medić
MentorDanijela Pezer (mentor)
Committee memberVladimir Vetma (član povjerenstva)
Committee memberIvan Vrljičak (član povjerenstva)
GranterUniversity of Split
(University Department of Professional Studies)
(Department of Mechanical Engineering)
Split
Defense date and country2022-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu opisane su tolerancije oblika i položaja te tolerancije duljinskih izmjera prema zahtjevima normi ISO 1101:2012 i ISO 286-2:2010. Pod pojam tolerancije podrazumijeva se dopušteno odstupanje od nazivne mjere. U ovom radu navedene su metode potrebne za ispitivanje odstupanja od dopuštenih tolerancija oblika i položaja. U okviru ovoga rada izvršeno je mjerenje na praktičnom uzorku (osovini). Mjerenje u praktičnom djelu je provedeno na osovini za prihvat alata i opisani su postupci mjerenja kao i korišteni mjerni instrumenti i uređaji.
Abstract (english)
In this final paper tolerances of geometry and position and tolerances of length measurements are described according to the requirements of ISO 1101:2012 and ISO 286-2:2010 standards. The term tolerance refers to the permitted deviation from the nominal measurement. The paper describes the methods required for testing deviations from the permitted shape and position tolerances. As part of this work, a measurement was made on a practical sample (shaft). The measurement in the practical part was carried out on the tool holder shaft and the measurement procedures as well as the used measuring instruments and devices were described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:705102
Study programmeTitle: Mechanical Engineering – professional - professional
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-26 11:35:13