prikaz prve stranice dokumenta MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA
Access restricted to students and staff of home institution
master's thesis
MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA
2021. urn:nbn:hr:228:952562
Bebić, Ivana
University of Split
University Department of Professional Studies

Cite this document

Bebić, I. (2021). MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:952562

Bebić, Ivana. "MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA." Master's thesis, University of Split, University Department of Professional Studies, 2021. https://urn.nsk.hr/urn:nbn:hr:228:952562

Bebić, Ivana. "MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA." Master's thesis, University of Split, University Department of Professional Studies, 2021. https://urn.nsk.hr/urn:nbn:hr:228:952562

Bebić, I. (2021). 'MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA', Master's thesis, University of Split, University Department of Professional Studies, accessed 27 May 2022, https://urn.nsk.hr/urn:nbn:hr:228:952562

Bebić I. MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA [Master's thesis]. Split: University of Split, University Department of Professional Studies; 2021 [cited 2022 May 27] Available at: https://urn.nsk.hr/urn:nbn:hr:228:952562

I. Bebić, "MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA", Master's thesis, University of Split, University Department of Professional Studies, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:228:952562

Please login to the repository to save this object to your list.
Metadata
TitleMODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU NOSAČA PREDNJEG ZAŠTITNOG DIJELA BRANIKA AUTOMOBILA
Title (english)MODELING OF RUNNER SYSTEM OF FENDER SUPPORT
AuthorIvana Bebić
MentorDanijela Pezer (mentor)
Committee memberIgor Gabrić (član povjerenstva)
Committee memberIvan Vrljičak (član povjerenstva)
GranterUniversity of Split
University Department of Professional Studies
Split
Defense date and country2021-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Zadatak ovog rada je modeliranje uljevnog sustava kalupa za izradu nosača prednjeg zaštitnog dijela branika automobila, te je model istoga dan od strane tvrtke AD Plastik u svrhu usporedbe dviju varijanti različitih uljevnih sustava. Usporedbom, odredit će se povoljnija varijanta na temelju rezultata provedenih analiza nakon izvršene simulacije, te će se u konačnici dati usporedba modeliranog uljevnog sustava s danom varijantom uljevnog sustava tvrtke AD Plastik. Za simulaciju procesa korišten je softver Autodesk Moldflow Adviser koji u današnjoj industriji uvelike pomaže jer rezultati analize otkrivaju pozitivne i negativne strane, a koje se odnose na materijal, kalup, uljevni sustav i druge parametre procesa injekcijskog prešanja. Zahvaljujući navedenom sofveru, moguće je izabrati odgovarajući materijal, dizajn te bilo koju drugu stavku koja negativno utječe na krajnji rezultat i izgled otpreska.
Abstract (english)
The task of this work is modeling the runner system of the mold for making the fender support and the model was given by company AD Plastik for the purpose of comparing two variation of different runner systems. The comparison will determine a more favorable variant based on the results of the analysis after the simulations, and finally a comparison of the modeled runner system with the given variant of the runner system of the company AD Plastik will be given.. Autodesk Moldflow Adviser software was used to simulate the process, which helps a lot in today's industry because the results of the analysis reveal positive and negative sides, which related to the material, mold, runner system and all other parameters of injection molding processes. Thanks to the above software, it is possible to change the material, design and any other ithem that negatively affects the final result and appearance of the stamp.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:952562
Study programmeTitle: Mechanical Engineering – specialist graduate - professional
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva (stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-19 13:55:28