prikaz prve stranice dokumenta MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA
Access restricted to students and staff of home institution
master's thesis
MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA
2021. urn:nbn:hr:228:950099
Slipčević, Josip
University of Split
University Department of Professional Studies

Cite this document

Slipčević, J. (2021). MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA (Master's thesis). Retrieved from https://urn.nsk.hr/urn:nbn:hr:228:950099

Slipčević, Josip. "MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA." Master's thesis, University of Split, University Department of Professional Studies, 2021. https://urn.nsk.hr/urn:nbn:hr:228:950099

Slipčević, Josip. "MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA." Master's thesis, University of Split, University Department of Professional Studies, 2021. https://urn.nsk.hr/urn:nbn:hr:228:950099

Slipčević, J. (2021). 'MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA', Master's thesis, University of Split, University Department of Professional Studies, accessed 18 May 2022, https://urn.nsk.hr/urn:nbn:hr:228:950099

Slipčević J. MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA [Master's thesis]. Split: University of Split, University Department of Professional Studies; 2021 [cited 2022 May 18] Available at: https://urn.nsk.hr/urn:nbn:hr:228:950099

J. Slipčević, "MODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA", Master's thesis, University of Split, University Department of Professional Studies, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:228:950099

Please login to the repository to save this object to your list.
Metadata
TitleMODELIRANJE ULJEVNOG SUSTAVA KALUPA ZA IZRADU VODILICA PREDNJEG STAKLA AUTOMOBILA
Title (english)MODELING OF RUNNER SYSTEM FOR CAR WINDOW GUIDES
AuthorJosip Slipčević
MentorDanijela Pezer (mentor)
Committee memberZlatko Jankoski (član povjerenstva)
Committee memberSlaven Šitić (član povjerenstva)
GranterUniversity of Split
University Department of Professional Studies
Split
Defense date and country2021-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu izvršiti će se modeliranje uljevnog sustava i simulacija tečenja polimerne taljevine za već unaprijed pripremljeni 3D model proslijeđen od strane tvrtke AD Plastik. Model dobiven od spomenute tvrtke odnosi se na vodilice prednjih stakala za automobile marke Citroen i Peugeot. Osim modela dobiveno je i konstruktivno rješenje uljevnog sustava sa svim rezultatima simulacije te vrsta materijala. Cilj ovoga završnoga rada je kroz dvije varijante osmisliti vlastiti uljevni sustav te ga usporediti s rješenjem iz tvrtke. Usporedbom rezultata simuliranja nastojati uvidjeti koje su to moguće prednosti ili nedostatci takvog sustava. Sumiranjem prednosti i nedostataka te postavljanjem određenih kriterija procijeniti koji bi uljevni sustav bio najpovoljniji za izradu kalupa za injekcijsko prešanje. Modeliranje uljevnog sustava ali i simulacija tečenja obaviti će se u Autodeskovom programskom paketu Moldflow Adviser iz 2018. godine, a čija će primjena i mogućnosti nešto detaljnije biti opisane u radu. Softversko modeliranje i simulacija u današnjem industrijskom svijetu predstavlja najvažniju kariku. Upotrebom softvera na pravilan način uz konstruktorovo znanje pogreške na modelu su svedene na najmanju moguću mjeru, skraćeno je vrijeme konstruiranja, broj testnih primjeraka je manji, ušteda novca itd.
Abstract (english)
In the final thesis, a modeling of runner system and flow simulation of polymer will be performed for model forwarded by the company AD Plastik. Model was obtained in 3D form and refers to the window guides for car brend Citroen and Peugeot. Except model, we also got a constructive solution of the runner system, type of material and simulation results. Main purpose of this thesis is to design your own runner system through two variants and compare it with the solution from the company. By comparing the simulation results, try to realize what are the possible advantages or disadvantages of such a system. Summarizing advantages and disadvantages and setting some condition, evaluate which runner system would be the best for production of mold for injection molding process. Modeling of the runner system and flow simulation of polymer will be performed in Autodesk's software package Moldflow Adviser from 2018. Application and possibilities of software will be elaborated in details in the thesis. Today, in industrial world, software modeling and simulation represent the most important link. Using the software in the right way with the designer knowledge, errors on the model are reduced to a minimum, production time is shortened, number of test copies is smaller, money is saved, etc.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:228:950099
Study programmeTitle: Mechanical Engineering – specialist graduate - professional
Study programme type: professional
Study level: specialist graduate
Academic / professional title: stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva (stručni/a specijalist/ specijalistica inženjer/ inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-10-19 13:49:15